| Saddle lateral traveling stroke (X axis) |
1120 mm
|
| Head horizontal traveling stroke (Y axis) |
510 mm
|
| Head vertical traveling stroke (Z axis) |
510 mm
|
| Distance from the top surface of table to the end of spindle |
180-690 mm
|
| Distance from the front of column to the center of spindle |
550 mm
|
| Machine weight (including NC device) |
5500 kg
|
| Machine height (from the floor) |
2701 mm
|
| Required floor area |
3000 x 2983 mm (with through coolant)
|
| Spindle motor |
11 KW(rated 10 min. operation), 7.5 KW (rated 30 min. operation), 5.5 (rated continuous operation)
|
| Spindle tapered hole |
7/24 taper No. 40
|
| Spindle speed |
40-7000 (option) rpm
|
| Working area on the table |
1460 x 510 mm
|
| Maximum weight to be loaded on the table
uniform load) |
500 kg
|
| X-axis rapid feed speed |
24000 mm/min.
|
| X-axis cutting feed speed |
1-5000 mm/min.
|
| Y-axis rapid feed speed |
24000 mm/min.
|
| Y-axis cutting feed speed |
1-5000 mm/min.
|
| Z-axis rapid feed speed |
20000 mm/min.
|
| Z-axis cutting feed speed |
1-5000 mm/min.
|
| Noise when cutting |
84 dB
|
| Maximum possible number of tools accommodated |
24 tools
|
| Tool selection system |
Tool holder No.fixed-address system (automatic short cut system)
|
| Tool shank |
NT-40
|
| Pull stud bolt |
YAMAZAKI made ANSI type
|
| Maximum permissible tool diameter Φ |
80mm
|
| When adjacent pocket is empty Φ |
110 mm
|
| Maximum permissible tool length |
350 mm
|
| Maximum permissible tool weight |
8 kg
|
| Maximum total weight of tools in the magazine |
96 kg
|
